Skip to toolbar

IRLP NEEDS DTMF TONES. ADDING DTMF TONES TO OLD RADIOS W/COMP.

Home Forums IRLP (Internet Radio Linking Project) IRLP NEEDS DTMF TONES. ADDING DTMF TONES TO OLD RADIOS W/COMP.

Login Register
Viewing 1 post (of 1 total)
  • Author
    Posts
  • #195
    K0YNE
    Participant

    IN ANOTHER ARTICLE, I WAS TALKING ABOUT MODIFYING OLD 2 METER OR UHF RADIOS WITHOUT DTMF
    TONES TO ACCESS REFLECTORS OR NODES. JUST ACCIDENTALLY BUMPED INTO THE SOLUTION FOR SOME PEOPLE. MULTIPSK VERSION 4.15 JUST HAPPENS TO HAVE A DTMF TONE BUTTON AMONG IT'S MODES. THE BUTTON IS HALF WAY DOWN AND TO THE LEFT CENTER NEAR THROB AND PAX.
    I PLACED SIX SPACES BETWEEN THE NUMBERS TO ALLOW A LITTLE TIME SUCH AS YOU MAY DO IF DIALING THESE FOUR DIGITS FROM THE KEYPAD. I FOUND IT TO WORK THE FIRST TRY. IT ACCURATELY
    ACQUIRED THE RIGHT NODE I DIALED. THERE COULD BE LIMITATIONS SUCH AS DIALING TOO FAST, TOO SLOWLY OR THE COMPUTERS VOLUME TOO HIGH OR TOO LOW. THE SPEAKER OR MICROPHONES QUALITY, BUT THE DTMF TONES HAVE BEEN USED FOR YEARS AND THEY DON'T FALTER TOO MANY TIMES.
    SO JUST GIVE THOSE RADIOS A TRY AND DOWN LOAD MULTIPSK AND ALL SHOULD WORK WELL.
    PAUL  K0YNE

Login Register
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.