ARAN Experimentors and Builders Club's First Project

Home Forums Electronics ARAN Experimentors and Builders Club's First Project

This topic contains 1 reply, has 1 voice, and was last updated by  kd0jcp 1 year, 5 months ago.

Login Register
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #772

    kd0jcp
    Participant

    Well We are moving toward having a High Altitude Balloon Launch on Field Day 2018. So I am going to start a topic on this and we will see how far it goes:

    Well the Hamfest is over so now we can move onto something more fun! We had tried this last year and I got busy and never got the building cleaned up to the point to build those Arrow Antennas but something has come along to force me out of hibernation and get this club back on track… We are presented with the possibility to have a High-Altitude Balloon launch during Field Day this year. I am still working to confirm this but for now we will begin preparations for this and go from there. The goal is to create an open, collaborative and fun environment to learn about science, technology, engineering and math subjects and put those to use. So to help get this started here is what I propose to do:

    — Rebuild a VHF Eggbeater antenna that I have so we can use it for an APRS I-gate to help track the ballon
    — Rebuild an Aprs Mobile I-gate that I have that has “hearing” issue in its current form.
    — Help Roger with any help he needs planning payloads, plans, launch and recovery of the balloon.
    — Rebuild the Slow Scan TV payload from the last launch including: looking at battery needs, Enable the sun mode on the camera, look at adding sensors and adding that data to the images sent down and other options.
    — Build a reliable receiving station for the SSTV images and move to the UHF eggbeater antenna I have to make receiving the images more reliable.
    — Build a new antenna for the payload to allow better reception on the ground.
    Come up with the Helium for the launch.
    — If our plan to have insurance falls through we may look at alternatives to help bring this launch a reality.
    — Possibly create “recovery” teams to help Roger find the balloon after it comes back to earth.
    — Learn more about the balloon launches including physics and other needed info.

    This is what I propose. Changes can be made. Including do we look at alternative payload ideas. Some of the items like APRS I-gates are almost a must however to help cover the area so we can help find the payload.

    Anyway. I am looking at having a Meeting Thursday May 3rd, 2018 at Ron’s Garage (1417 W 4th St Hastings, NE 68901) at 7pm to decide on a plan and if we can all agree on said plan start sorting through what we have and what we need.

    This is tentative on receiving approval from Ron to do this. Once I know for sure you will get another email from me confirming this.

    So stay tuned. If you are interested in helping with this let me know via email and I will begin creating a mailing list for the ARAN Experimenters and Builders Club. Even if you cant make the first meeting, let us know, we maybe changing days if needed as we move forward. So email with a day that works for you. Even if you can’t make it to every meeting let us know if you want to help or be a part of this. A digital component to the group will be coming so we can collaborate via the internet somehow.

    #773

    kd0jcp
    Participant

    Ok so I will work on a post to update on where we are at but for right now here are the Modules we have in stock we can use to add some “data” to the SSTV payload.

    — Magnetometer
    — Pressure Sensor
    — Accelerometer
    — GPS Breakout Module
    — And I want to find a good temperature sensor to add to the payload.

    KD0JCP

Login Register
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Skip to toolbar